Category: Labor Protection Supplies

How to Choose a Safety Helmet: GB 2811 Explained

To choose the right safety helmet, check that it complies with GB 2811-2019, matches the work scenario, and passes acceptance checks on markings, test reports and production date. Safety helmets are the most common — and most commonly mis-bought — PPE on construction sites: the usual mistakes are outdated stock, the wrong protection level, or helmets worn past their expiry. This guide explains what really matters when buying.

Know the Standard First: GB 2811-2019 Is the Current Version

The current national standard for safety helmets in China is GB 2811-2019, Head Protection — Safety Helmets, in force since 1 July 2020, replacing the 2007 edition. Write the standard number in full — including the year — on purchase contracts and acceptance forms.

The standard sets several key indicators you can check directly against test reports:

  • Impact absorption: under a 49 J impact, the force transmitted to the headform must not exceed 4,900 N. This is the helmet's core indicator — when a falling object strikes, the helmet must dissipate most of the impact.
  • Penetration resistance: a 3 kg steel cone dropped from 1 m must not pierce the shell or touch the headform.
  • Weight: no more than 430 g for ordinary types, 600 g for special types. A helmet that is too heavy won't be worn, however good its protection.
  • Chin strap strength: between 150 N and 250 N — too loose and it falls off, too tight and it is uncomfortable.

Also note the scope: GB 2811 does not cover firefighting, emergency rescue, sports or vehicle head protection. Fire helmets, bump caps and work caps each have their own standards — do not judge them by the safety helmet standard, and do not use them as safety helmets.

Acceptance Checks: Markings, Reports and Dates

The inside of the shell should carry permanent markings covering at least the standard number, manufacturer name, production date, product classification mark and mandatory scrapping date. Treat unclear or incomplete markings — or a mere sticker — with caution.

Test reports must match the delivered goods: model, manufacturer and standard number on the report must agree with the product, and the report must be within its validity period. If the supplier provides only an expired report, or a report that doesn't match the goods, ask for a new one.

Production date matters. Safety helmets have a service life: plastic shells age and become brittle under UV light, heat and humidity. As a rule of thumb, plastic helmets last about 2.5 years and fibreglass helmets about 3.5 years — always follow the mandatory scrapping date marked by the manufacturer. "New" helmets that have sat in storage for years may already be near their scrapping date when they arrive.

Since September 2024, safety helmets have been under industrial product manufacturing licence management in China; buyers can verify the licence number when purchasing.

Choosing by Work Scenario

  • General construction and factory workshops: an ordinary helmet is enough — choose an ABS or HDPE shell, with ventilation for summer.
  • Work at height or risk of side impact: choose a model with lateral protection, with an adjustable headband and chin strap.
  • Electrical work: choose a model with electrical insulation properties, and confirm the voltage rating matches the working voltage.
  • Cold or hot environments: choose special types rated for low or high temperatures — ordinary plastic helmets lose performance at temperature extremes.

Colour is generally used to distinguish trades or roles, not protection levels.

Common Mistakes

  • More expensive means better. A helmet must first meet the standard and suit the scenario; a pricier model beyond your needs is not necessarily more suitable.
  • Using a bump cap as a safety helmet. Bump caps only protect against light knocks — they cannot stop falling objects. They are not the same thing.
  • Wearing a helmet until it breaks. An expired shell has aged, and its impact absorption is greatly reduced.
  • Not wearing the chin strap. The helmet can slip off when bending or looking down, leaving the head unprotected.

Frequently Asked Questions

How often should a safety helmet be replaced?

Follow the mandatory scrapping date marked by the manufacturer. As a rule of thumb, plastic helmets last about 2.5 years and fibreglass helmets about 3.5 years. Replace immediately after any impact, crack or deformation — don't wait for the expiry date.

How can I tell a genuine safety helmet when buying online?

Check three things: whether the permanent markings inside the shell are complete, whether the test report matches the actual product, and whether the manufacturer holds a manufacturing licence.

Can I drill holes in or paint a safety helmet?

No. Drilling, painting or sticking non-breathable labels on a helmet can weaken the shell or affect its performance. For printed text or logos, order custom-made helmets from the manufacturer.

Is there a newer version of GB 2811?

The current valid version is GB 2811-2019. A revision is in progress; until a new version is officially published and implemented, purchasing and acceptance still follow the 2019 edition.

WhatsApp 18300232331 Get a Free Quote
Chat Get a Quote