Safety Shoes Buying Guide: Impact & Puncture Standards
To choose the right safety shoes, match the protection level to the job hazard under GB 21148-2020: impact rating (AN1 or AN2), puncture resistance, and any anti-static, insulation or chemical resistance the job needs. Buy the wrong pair and workers get blisters and refuse to wear them — or worse, the protection they need isn't there. This guide explains each function against the current standard.
Know the Standard First: GB 21148-2020
The current national standard for safety shoes in China is GB 21148-2020, Foot Protection — Safety Shoes, in force since 1 August 2021. It replaces GB 21148-2007 and three other older standards, consolidating safety shoes, protective shoes, occupational shoes and electrically insulating shoes. Buy to this standard number — don't buy products marked with superseded standard numbers.
Impact protection is the core indicator, with two levels:
- AN1: 200 J impact resistance, 15 kN compression resistance
- AN2: 300 J impact resistance, 20 kN compression resistance
AN2 offers higher protection and suits places with a high risk of heavy falling objects. AN1 is enough for general workshops and warehouses; heavy machinery, metallurgy and construction sites should choose AN2.
Protection Functions: Choose by Hazard
- Impact protection: steel or composite toe caps protect the toes against falling or crushing objects.
- Puncture resistance: steel or composite puncture-proof midsoles protect against nails, metal shards and sharp objects on the ground. Essential on construction sites and scrap yards.
- Anti-static: prevents static build-up; suitable for electronics workshops and flammable or explosive environments.
- Electrical insulation: for electrical work, graded by voltage rating — check the rating matches the working voltage. Insulation degrades with wear and moisture and must be tested regularly.
- Acid and alkali resistance: for chemical plants, laboratories and other posts exposed to acids and alkalis.
- Waterproof and slip-resistant: for wet, damp or oily floors — tread pattern and sole material determine slip resistance.
One pair of shoes can combine several functions. Check each item against the post's hazard list — don't look at impact protection alone.
Choosing by Scenario
- Construction and heavy handling: impact plus puncture protection, with hard-wearing, slip-resistant soles.
- Machining: impact, puncture and slip protection, with a sturdy toe cap.
- Electrical work: electrical insulation comes first — confirm the voltage rating and test insulation performance regularly.
- Chemical work: acid and alkali resistance, with a corrosion-resistant upper.
- Wet or damp work: waterproof and slip-resistant; choose breathable styles for summer and insulated styles for winter.
Buying Tips
Check the markings: the inside of the shoe or the tongue should show the standard number, protection level and manufacturer information. Check the test report: model and standard number on the report must match the actual product. Try them on for fit: safety shoes run heavy, so get the size right — try them with the socks normally worn, leave a little room, and walk a few steps to confirm they don't rub or pinch the toes.
Steel or composite toe caps? Steel toe caps offer stable impact protection at a lower price, but they are heavy, cold in winter and trigger security alarms. Composite toe caps are lighter, non-conductive and pass through security checks, at a higher price. Both meet the standards — choose by working environment.
Common Mistakes
- Looking at impact protection only. Nails and metal shards piercing the sole injure just as badly as impact injuries.
- Wearing insulating shoes as ordinary shoes. Insulation degrades with wear and moisture — damaged insulating shoes worn as if they still insulate offer no protection at all.
- Heavier steel toe caps are better. Protection is about the standard level, not the weight.
- Not replacing damaged shoes. A deformed toe cap, worn-out sole or torn upper means the protection is gone.
- Wearing ordinary trainers or cloth shoes instead of safety shoes. Shoes without protective functions have no place on the workshop floor, however comfortable.
Frequently Asked Questions
How do I choose between AN1 and AN2?
Look at the weight and height of falling objects. General workshops and warehouses can choose AN1; heavy machinery, metallurgy and construction sites should choose AN2. If in doubt, AN2 is the safer choice.
Steel or composite puncture-proof midsoles — which is better?
Steel midsoles offer stable puncture protection at a lower price, but they are heavy, cold in winter and trigger security alarms. Composite midsoles are lighter, non-conductive and pass through security checks, at a higher price. Both meet the protection standards — choose by working environment.
How often should insulating shoes be tested?
Test regularly following the product instructions and your company's safety management rules, and stop using and send for testing immediately if damaged or damp. Never judge insulation performance by feel.
Can safety shoes be washed in water?
Soaking the whole shoe in water is generally not recommended — it can affect bonding and insulation performance. Wipe dirt off with a damp cloth and air-dry before storing. Leather uppers can be polished regularly.