Category: Protective Supplies

KN95 vs KN90 Masks: What's the Difference and How to Choose

The most common question when buying particulate respirators is how to choose between KN95 and KN90. Choose wrong and you either get too little protection, or a mask so uncomfortable that workers won't wear it. This guide explains the difference and how to choose, under the current standard.

How the Standard Divides Them: GB 2626-2019

The current national standard for particulate respirators is GB 2626-2019, Respiratory Protection — Self-Inhalation Filter Type Particulate Respirators, effective 1 July 2020, replacing the 2006 edition. The standard divides masks into three classes by filtration efficiency:

  • KN90: filtration efficiency of at least 90%
  • KN95: filtration efficiency of at least 95%
  • KN100: filtration efficiency of at least 99.97%

The number after KN is the filtration efficiency. Also note the difference between KN and KP: KN only filters non-oily particles, while KP filters both oily and non-oily particles. Oily particles such as oil mist, cooking fumes and asphalt smoke need KP masks — KN protection drops in those environments.

KN95 or KN90: How to Choose

The core rule is to choose by particle concentration — not by going for the highest class.

KN95 filters better, but breathing resistance is higher too, so long wear feels stuffier and more tiring. High-concentration dust, welding fume and grinding work call for KN95. In low-concentration dust and general airborne dust, KN90 is enough, more comfortable to wear, and workers are more willing to keep it on for the whole shift.

For long continuous wear, comfort has to be weighed too — the best mask is useless if it won't stay on. Valved masks lower breathing resistance and suit long wear and physical work, but not operating theatres or cleanrooms where exhaled air must not contaminate the surroundings.

Fit Matters More Than Class

However high the class, a leaking mask is the same as no mask. When putting one on, press the nose clip firmly and check that the edges seal against the face — facial hair breaks the seal, so bearded workers need extra care. Do a quick seal self-check each time: cover the mask with your palm and breathe in sharply — the mask should pull inward; when breathing out, no air should leak at the edges.

Masks must match the wearer's face shape. Before bulk buying, let workers try samples on and find a model that seals well.

A Particulate Respirator Is Not a Cure-All

Particulate respirators stop dust, smoke and mist — they do not stop gases or vapours. Work with organic solvents, paint or pesticide spraying involves gases and vapours, so use a gas mask under GB 2890-2022, Respiratory Protection — Self-Inhalation Filter Type Gas Masks, matching the filter cartridge to the gas.

Oxygen-deficient environments and underwater work can't use particulate respirators either — they need supplied-air respiratory protection.

Also, a KN95 mask is not the same as a medical mask. Medical protective masks follow GB 19083-2010, surgical masks follow YY 0469-2011, and everyday protective masks follow GB/T 32610-2016. KN95 masks have no synthetic blood penetration test, so they cannot replace medical masks where bodily fluids may splash.

Common Mistakes

  • KN95 is the same as N95. N95 is the US NIOSH standard; KN95 is the Chinese national standard. The test methods differ, so they can't be treated as equal.
  • Thicker is better. Filtration depends on the filter media and the seal, not on thickness.
  • Washing and reusing disposable masks. Washing destroys the filtration layer and cuts efficiency sharply — replace a disposable mask when it's dirty.
  • Wearing it backwards or not pressing the nose clip. The nose is where leaks are worst when the clip doesn't fit.

Frequently Asked Questions

Can a KN95 mask protect against viruses?

A KN95 mask filters airborne particles, including micro-organisms carried on droplets and aerosols, but it is not a substitute for a medical protective mask in medical settings. Choose for everyday protection by actual need.

Which is more comfortable to wear, KN90 or KN95?

Generally KN90 has lower breathing resistance, so it is more comfortable for long wear. In low-concentration dust environments KN90 is enough, and workers are more willing to keep it on.

What mask should I use for painting work?

Painting involves both paint-mist particles and organic solvent vapour. A particulate respirator alone is not enough — use a gas mask with filter cartridges, selected under GB 2890-2022.

How often should a mask be replaced?

Replace it when breathing resistance rises noticeably, or when the mask is damaged, contaminated or smells. Disposable particulate respirators are generally changed each shift — don't use them past their life.

WhatsApp 18300232331 Get a Free Quote
Chat Get a Quote