Category: Labor Protection Supplies

How to Choose Work Gloves: A Matching Guide by Trade

Hand injuries are among the most common workplace injuries in factories — and buying the wrong gloves is worse than buying none: a job that needs cut protection gets ordinary cotton gloves, a job that needs heat protection gets synthetic-fibre gloves. Choose gloves by hazard first, then by standard, then by fit.

Know the Standards First

The current standard for mechanical-hazard protective gloves is GB 24541-2022, Hand Protection — Mechanical Hazard Protective Gloves, effective 1 January 2024, replacing the 2009 edition. It tests abrasion, cut, tear, puncture and impact resistance — check the test report against these items when buying.

GB 42298-2022, Hand Protection — General Technical Specification, sets general requirements for all protective gloves and took effect at the same time. Welder's gloves have their own standard, GB 45188-2024, Hand Protection — Welder's Protective Gloves, effective 1 January 2026, divided into Class A (higher heat protection) and Class B (lower heat protection).

Match Gloves by Trade

  • Machining and sheet metal: cut and abrasion resistance matter most — choose PU-coated or nitrile-coated gloves, which keep dexterity and grip. For sharp edges and sheet-metal burrs, choose a higher cut-resistance level.
  • Welding: cowhide welder's gloves, resistant to molten metal spatter and heat, with extended cuffs to protect the wrist. Choose Class A for heavy welding and Class B for light welding. Never use synthetic-fibre gloves for welding — they melt in heat and stick to skin.
  • Handling, logistics and construction: dotted anti-slip palms and abrasion resistance are the priority; cotton or nitrile-coated gloves both work. Keep loose cotton gloves away from rotating machinery — they can be caught and pulled in.
  • Cold storage and low-temperature work: insulated gloves with a fleece lining and a windproof, waterproof outer layer. Ordinary gloves go stiff in the cold and lose both dexterity and warmth.
  • Precision assembly and electronics: thin PU-coated gloves with good dexterity for fine work. Choose anti-static gloves where static protection is required.
  • Chemical handling and cleaning: chemical-resistant gloves, chosen by checking compatibility with the chemicals handled — nitrile, PVC and other materials resist different chemicals. Chemical gloves also have a breakthrough time; wearing them does not mean unlimited protection.
  • Electrical work: insulating gloves are specialist protection — choose by voltage class, and never substitute ordinary gloves.

Buying Points

Check the standard number and the tested items, and make sure the model on the report matches the goods. The size must fit: too loose and gloves can be caught in equipment or lose grip; too tight and they cause fatigue and restrict blood flow. Let workers try them on before buying, and run through the actual work movements to confirm dexterity and grip.

Don't choose by habit. Cotton gloves that have always been bought are not right for every job. When processes or equipment change, the hazards change — and the gloves must change with them.

Common Mistakes

  • One pair of gloves for every trade. Different jobs have different hazards, so gloves must be matched separately.
  • Choosing by price alone. Cheap gloves with too low a protection level cost far more once an injury happens.
  • Keeping damaged gloves in use. A glove with holes or peeling coating has lost its protection — replace it promptly.
  • Using synthetic-fibre gloves for welding or open flames. Synthetic fibre melts in heat and can injure worse than no gloves at all.
  • Wearing cotton gloves near rotating equipment. Loose threads and cuffs can be caught and cause serious injury.

Frequently Asked Questions

How do I choose the right glove size?

Choose by palm circumference, and let workers try them on before buying. The same size can fit differently across brands, so confirm with samples before bulk buying.

How many cut-resistance levels are there for gloves?

Cut resistance is graded by tests under GB 24541-2022 — the higher the level, the stronger the cut protection. Check the cut-resistance level on the test report and choose by how sharp the edges you handle are; the highest level is not always needed.

How do I choose between nitrile and latex gloves?

Nitrile gloves resist oil and chemicals and rarely cause allergies, so they suit most industrial settings. Latex gloves are elastic and fit well, but some people are allergic to latex, and latex swells in contact with oils. Choose by the job and by allergy risk.

How often should gloves be replaced?

There is no fixed schedule — it depends on use. Replace gloves when they are torn, the coating is peeling, they have gone stiff, or they are contaminated. Set a replacement cycle by job role and include it in PPE issue management.

WhatsApp 18300232331 Get a Free Quote
Chat Get a Quote