How to Choose Nitrile Gloves: Medical vs Industrial
Nitrile gloves all look like the same thin blue glove, but medical examination gloves and industrial gloves differ considerably: medical ones must control pinhole rates and hold registration; industrial ones are judged on chemical resistance. Using industrial gloves for medical examination risks cross-infection from excess pinholes; using medical gloves with chemicals may not protect enough. This guide explains the differences.
Medical Examination Gloves: Pinhole Rate and Registration
The current national standard for medical examination gloves is GB/T 10213-2025, Single-Use Medical Rubber Examination Gloves, issued 29 August 2025 and effective 1 September 2026, fully replacing GB 10213-2006 and identical to ISO 11193-1:2020. The standard sets sampling inspection requirements for watertightness (pinholes): inspection level G-I and an acceptable quality limit (AQL) of 2.5.
Two other international sets of standards are commonly used for medical examination gloves: the EU standard EN 455-1 sets the pinhole AQL at 1.5 for examination gloves and 0.65 for surgical gloves; the US FDA samples under 21 CFR 800.20, with an AQL of 2.5 for examination gloves and 1.5 for surgical gloves. The smaller the AQL number, the stricter the pinhole requirement. Nitrile examination gloves in the US also commonly use ASTM D6319.
Medical examination gloves are medical devices — check the medical device registration certificate or filing record when buying. Medical nitrile gloves contain no natural rubber protein, so people with latex allergy can wear them — one reason they are more popular than latex gloves in medical settings.
Industrial Gloves: Chemical Resistance and Durability
Industrial nitrile gloves are not managed as medical devices; buying is about protective performance and test reports. For scenarios involving chemicals, look at EN ISO 374, the European standard for chemical protective gloves, which assesses three properties: penetration (chemicals entering through pinholes, cracks and other defects), permeation (chemicals passing through intact glove material at molecular level) and degradation (changes in the glove material's performance after contact with chemicals).
EN ISO 374 classifies gloves by permeation performance into three types: Type A has a breakthrough time of at least 30 minutes for at least 6 test chemicals, Type B for at least 3, and Type C for at least 1 with a breakthrough time of at least 10 minutes. Breakthrough time has six levels, from over 10 minutes to over 480 minutes. When buying, check the breakthrough time for the actual chemicals involved — do not just look at the type letter.
Industrial scenarios also need abrasion, puncture resistance and weight. The heavier the glove, the thicker and more durable it is, but the less flexible. Choose the weight by operating intensity — auto repair, laboratory and cleaning scenarios follow the work: thin models for fine work, thick models for heavy work.
The Core Differences
- Different regulation: medical gloves are medical devices and need registration; industrial gloves are labor protection products, judged by standards and test reports.
- Different focus: medical gloves emphasize pinhole rate (AQL); industrial gloves emphasize chemical resistance (breakthrough time) and durability.
- Different scenarios: medical gloves are used for clinical examination, palpation, nursing and other operations involving patients; industrial gloves are used in auto repair, laboratories, cleaning, food processing and similar scenarios.
- Not interchangeable: industrial gloves are not controlled to medical pinhole standards and must not be used for operations involving patients' wounds or mucous membranes; medical gloves have not been tested for chemical resistance and must not be used with chemicals.
Buying Points
- Decide the use first: medical examination means medical examination gloves — check the registration; industrial work means industrial gloves — check EN 374 or the relevant test report.
- Check the pinhole rate: for medical use, ask the AQL value — AQL 1.5 is stricter than 2.5.
- Check weight and thickness: the nitrile gloves on this site come in 3.5 g economy, 4.6 g durable and 5.0 g extra-strong models — choose by operating intensity.
- Powdered or powder-free: powder-free is recommended for medical use — the corn starch in powdered gloves can cause allergies or contaminate wounds.
- Check the texture: fingertip or palm texture adds friction, so instruments and test tubes are less likely to slip from the grip.
- Check sizes: S, M, L and XL should all be available. Too tight and they tear easily; too loose and operation suffers. Try them on before bulk buying.
Common Mistakes
- All nitrile gloves are the same. Medical and industrial gloves differ in standards, pinhole rates and chemical resistance — check the use before buying.
- Thicker is always better. Thick gloves are durable but less flexible, and fine work is more likely to go wrong — choose thickness by the operation.
- Nitrile gloves never cause allergies. Nitrile contains no natural rubber protein, so allergy risk is lower than latex, but a very small number of people can still be allergic to other chemical components in nitrile gloves.
- One pair lasts all day. Disposable gloves should be changed promptly after contact with patients or contaminants, and replaced immediately if damaged — do not wear them beyond their use.
Frequently Asked Questions
How can medical and industrial nitrile gloves be told apart by appearance?
They look basically the same. Tell them apart by the packaging: medical gloves carry a medical device registration number and the GB/T 10213 standard number; industrial gloves are marked with industrial standards such as EN 374.
How much difference is there between AQL 1.5 and AQL 2.5?
AQL is the acceptable quality limit — the smaller the number, the stricter the requirement. AQL 1.5 allows a lower pinhole rate in sampling than 2.5. For medical use, choose products with AQL 1.5.
Can medical nitrile gloves be used in food processing?
Yes — medical gloves have higher hygiene requirements, so there is no problem using them in food processing. But the food industry generally chooses industrial-grade nitrile gloves for better value; pick powder-free, food-grade certified products.
Can nitrile gloves touch alcohol or disinfectants?
Nitrile resists alcohol and common disinfectants, so brief contact is fine. For prolonged contact with organic solvents, check the breakthrough time under EN 374 and choose a model with enough chemical resistance.