Category: Labor Protection Supplies

How to Choose Winter Safety Shoes: Warmth and Grip

When winter arrives, complaints about safety shoes multiply: cold feet, slipping, soles going stiff, feet damp and cold after a day's wear. A winter safety shoe is not an ordinary safety shoe with a layer of fleece added — warmth, slip resistance and impact protection have to be judged together; miss one and winter will be miserable.

What to Look for in Warmth: Cold Insulation and Lining

Whether a safety shoe has cold-insulation performance is marked in the standard by the code CI. Under GB 21148-2020, CI stands for the cold insulation of the sole: after the whole shoe is kept at −17 °C for 30 minutes, the temperature drop on the inner sole surface must not exceed 10 °C. When buying winter safety shoes, first ask the supplier whether the shoe carries CI — only a claim backed by a test report counts; do not trust "fleece-lined and warm" on its own.

The lining is the second line of warmth. Common options are fleece lining, cotton lining and composite thermal lining: cold stores and outdoor work in severe cold need thick lining, while indoor workshops and winters in the south need only thin lining. Too thick a lining is also a problem: it takes up space inside the shoe, the foot cannot move freely, and blood circulation suffers. Shaft height also affects warmth — a high-top shoe protects the ankle and keeps out wind and snow, so outdoor work should prefer high-top styles.

Matching clothing matters too. The current standard for cold-protective clothing is GB 38300-2025, Protective Clothing — Cold Protective Clothing, in force from 1 September 2026, replacing GB/T 38300-2019, for cold-protective clothing worn during labour in cold environments to prevent frostbite and other harm. Warm shoes with inadequate clothing still leave the worker cold.

What to Look for in Slip Resistance: SRA, SRB, SRC

In winter, ground ices over, snow piles up and water freezes — slip resistance is a hard requirement for safety shoes. GB 21148-2020 grades slip resistance in three levels: SRA is tested on ceramic tile with a detergent lubricant, with a heel slip coefficient of at least 0.28 and a forefoot coefficient of at least 0.32; SRB is tested on steel plate with a glycerol lubricant, with a heel coefficient of at least 0.13 and a forefoot coefficient of at least 0.18; SRC meets both SRA and SRB, and has the highest slip-resistance requirement.

For winter outdoor work, cold stores, cold chain and food processing, where floors are wet and icy, choose SRC first. A shoe that only meets SRA is adequate on dry tile, but can slip on icy steel plate or oily floors. Tread pattern matters too: deep, large-lug treads grip well, while shallow flat treads slip easily on ice. Rubber soles stiffen less than polyurethane soles in low temperatures, so outdoor work in the north can prefer rubber soles.

Trade-Offs When Choosing Winter Shoes

Warmth and breathability must be balanced. A completely non-breathable shoe traps foot sweat, the inside stays damp and feels colder, and long wear can even cause chilblains. Choose a style with a moisture-wicking lining and some breathability in the shaft, worn with thick moisture-absorbing socks, for better warmth.

Leave room in the size. With thick winter socks, shoe size is generally half a size to a full size larger than usual, depending on lining thickness and sock thickness. When counting sizes, have staff try shoes on wearing their winter work socks — do not order by summer sizes. A shoe that is too tight squeezes the foot, restricts circulation and makes the foot colder.

Impact and puncture protection must not be dropped. Winter shoes must still meet GB 21148-2020, with AN1 200 J impact protection and 1,100 N puncture resistance — none of these may be missing. Do not buy ordinary cotton shoes with no protective performance for site work just because they are warm: warmth and protection are two different things and cannot replace each other.

Care and Replacement

Dry winter safety shoes promptly after use — do not put them directly on a radiator to bake, as heat ages the sole and opens the glue. When the inside is damp, stuff newspaper inside or use shoe trees, and dry naturally in the shade. Replace shoes when the tread is worn flat, the lining has clumped, or the shaft has split. Give each worker two pairs to rotate, so shoes have time to dry fully and last longer.

Frequently Asked Questions

Are thicker winter safety shoes always warmer?

Not necessarily. Warmth depends on cold-insulation performance and lining material, not on thickness alone. A shoe that is too thick restricts foot movement and blood circulation, and can feel colder — check for the CI cold-insulation marking first, then the lining and shaft.

Can cold-storage shoes and outdoor site shoes be used interchangeably?

Not necessarily. A cold store is continuously cold with smooth tiled floors, so warmth and slip resistance both matter; an outdoor site also needs impact, puncture and water protection. The two can overlap, but check each scenario item by item before buying.

Will SRC-rated shoes never slip on ice?

SRC is the highest slip-resistance grade under standard test conditions and greatly reduces the risk of slipping, but it does not mean a shoe can never slip on any ice. On badly iced ground, add anti-slip chains or sand — do not rely on one pair of shoes alone.

When is the best time to buy winter safety shoes?

Order about a month and a half before winter, leaving time for production, delivery, acceptance and distribution. Buying only after temperatures drop usually means incomplete sizes and slow delivery, leaving workers to make do with old shoes.

WhatsApp 18300232331 Get a Free Quote
Chat Get a Quote