Category: Protective Supplies

How to Read DuPont Suit Models: Tyvek vs Tychem

DuPont protective suit model codes look like passwords, but every letter has a meaning — read them and you know the material and what the suit protects against just from the model. This guide explains them using the real models stocked on this site.

Two Ranges: Tyvek Stops Particles, Tychem Stops Chemicals

DuPont protective suits come in two ranges:

The Tyvek range is made from flash-spun high-density polyethylene — light, breathable and antistatic — and mainly protects against fine particles and limited liquid splashes. Tyvek 400 meets the Type 5 (solid particulate protection) and Type 6 (limited splash protection) requirements of GB 24539, protects against fine particles and fibres as small as 1 micron, and suits dusty workshops, spraying, cleanrooms, pharmaceutical production and similar settings.

The Tychem range adds a coating or composite film to the Tyvek base, giving stronger chemical protection, in three grades from low to high: 2000 C, 6000 F and 10000. Tychem 2000 C is coated Tyvek fabric, effective against a range of high-concentration inorganic chemicals and biological hazards, and meets the Type 3 requirements of GB 24539; Tychem 6000 F is Tyvek base with a composite film, protecting against a range of toxic industrial organic chemicals and high-concentration inorganic chemicals, and meets the Type 3-ET requirements; Tychem 10000 is a multi-layer composite film fabric, with the highest chemical protection grade.

How Model Codes Are Named

A DuPont protective suit model is generally made up of a range code, a number, a style letter and a colour code, taking the products on this site as examples:

  • TBM 001: T stands for Tyvek, BM is the style code, 001 is the number — Tyvek 400 coveralls, formerly model 1422A.
  • TC198T: TC stands for Tychem 2000 C, 198 is the number, T is the hooded coverall style — Tychem 2000 C chemical protective coveralls (TC198T YL, formerly Tychem C).
  • TF198T: TF stands for Tychem 6000 F, 198 is the number, T is the hooded coverall style — Tychem 6000 F hooded coveralls (TF198T GY, formerly Tychem F).
  • TK128T, TK527T: TK stands for Tychem 10000, 128 and 527 are the numbers — the former is a coverall style, the latter a fully encapsulating style.
  • Colour codes: WH is white, YL is yellow, GY is grey, LY is yellow-green. Colour only distinguishes the range and style — it is not a protection grade.

Model Cross-Reference for This Site

The DuPont protective suit models stocked on this site are all genuine products in stock:

  • Tyvek 400 range: TBM 001 coveralls (formerly 1422A, Type 5/6, white), TBM 002 Dual dual-fabric coveralls (Type 5/6, dust-proof and antistatic), TMC Plus medical protective coveralls (taped seams, formerly 1422A medical grade).
  • Tychem 2000 C range: TC198T YL chemical protective coveralls (formerly Tychem C, Type 3/4, yellow), TC0290 YL reverse-wear gown (yellow, one size).
  • Tychem 6000 F range: TF198T GY hooded coveralls (formerly Tychem F, Type 3/4, grey), TF630 WG ventilated protective suit (Tychem 6000 AL, with socks and gloves).
  • Tychem 10000 range: TK128T LY chemical protective suit (yellow-green, with boot covers), TK527T LY fully encapsulating Level B protective suit (green).
  • Accessories: TY272B WH apron (Tyvek 400, white). Shoe covers, boot covers, hoods, sleeve covers and other accessories should be used with suits from the same range, so the protection performance matches.

How to Select

Fix the hazard first, then the range: choose Tyvek 400 for dust and spraying; Tychem 2000 C for inorganic acids and alkalis; Tychem 6000 F for organic solvents and high-concentration chemicals; Tychem 10000 for high-risk chemicals and emergency rescue; TMC Plus for medical settings — do not use an industrial model instead.

When selecting, also check the fabric's permeation data for the specific chemical — DuPont's SafeSPEC selection tool can look up breakthrough times by chemical name. Different chemicals vary greatly, so do not order by the range name alone.

Common Mistakes

  • Bigger numbers are better. The number after Tychem is a range code — choose by chemical and scenario.
  • Old and new model numbers are two different products. 1422A becoming TBM 001 is a naming change — the product is the same one, so order by the new model number.

Frequently Asked Questions

What is the difference between TBM 001 and TMC Plus?

Both are Tyvek coveralls. TMC Plus is medical grade, with taped seams, for medical settings; TBM 001 is the industrial model, for particulate protection and limited splashes.

How do I choose between Tychem 2000 C and 6000 F?

Choose 2000 C for inorganic chemicals and 6000 F for organic chemicals or high-concentration chemicals. Confirm by checking DuPont SafeSPEC permeation data for the specific chemical.

What respirator goes with the TK527T fully encapsulating suit?

A fully encapsulating suit is generally worn with a positive-pressure self-contained breathing apparatus. Fix the exact setup by the site risk assessment and the requirements of GB 24539, and call for advice before ordering.

How do I choose the size of a DuPont protective suit?

Choose by height and build against the size chart, and check that you can squat and raise your arms normally when wearing it. Before bulk buying, take samples and try them on first.

WhatsApp 18300232331 Get a Free Quote
Chat Get a Quote