How to Choose a Face Shield: Impact and Heat
Safety glasses protect only the eyes; a face shield protects the whole face. Flying chips from grinding, sparks of molten metal, splashes of acids and alkalis, and the heat radiation in front of a furnace — these hazards threaten more than the eyes: cheeks, forehead and neck are all in range. Wearing glasses without a shield leaves the face exposed. This guide explains the difference between impact and heat-resistant face shields and how to choose.
Which Standard Applies: GB 14866-2023
General face shields follow GB 14866-2023, General Technical Specification for Eye and Face Protection, the current mandatory national standard for eye and face protection, in force from 1 January 2025, replacing GB 14866-2006 and GB 32166.1-2016. The standard divides products by shape into glasses, goggles and face shields, and a face shield belongs to the face-shield class.
Welding face shields and helmets follow a different set of standards: GB/T 3609.1-2008, Occupational Eye and Face Protection — Welding Protection — Part 1: Welding Protectors, in force from 1 October 2009. Welding protectors must guard against arc light, molten metal splash and dust, and their filters carry shade numbers — the higher the number, the darker the filter — matched to the welding method and current. Auto-darkening welding filters follow GB/T 3609.2-2009. GB 14866-2023 expressly does not apply to welding protectors, so a general shield must not be used for welding.
Impact Face Shields: Material and Coverage
Impact face shields mainly guard against high-speed chips from grinding, cutting, drilling and riveting. Choose on three points:
- Material. Visors are usually polycarbonate (PC), with good impact resistance and high transparency; acrylic (PMMA) is also transparent, but weaker against impact than PC. Choose PC for heavy-impact work.
- Coverage. The visor must cover from the forehead to the chin and from side to side to the front of the ears — too small and it protects nothing; if the lower edge is too short, splash easily enters from below.
- Wearing style. A headband shield can be worn on its own or with a safety helmet; a shield used with a helmet must have a matching interface — do not force it on.
A face shield cannot replace safety glasses. Splash can reach the eyes from below or the sides of the shield, so international practice treats the shield as only the second layer of protection, with safety glasses or goggles worn underneath. For heavy grinding and cutting, glasses plus shield is the safest combination. See How to Choose Safety Glasses: Impact and Splash Protection.
Heat and Thermal-Radiation Shields: Check Heat Resistance
Furnace work, casting, forging, glass processing and metal heat treatment bring heat radiation and molten metal splash as well as flying chips. These scenes need a heat-resistant shield — check the heat resistance and temperature range marked on the product, and do not use an ordinary impact shield against heat.
The visor and headband materials of a heat-resistant shield must withstand the working temperature without deforming or softening after long exposure. Some heat-resistant shields carry a coating that reflects part of the infrared radiation and eases the burning feeling on the face. Judge by the site temperature, the distance from the heat source and the continuous working time together, and ask the supplier for a test report where needed.
Scenes with molten metal splash also need a shield rated against molten metal splash. Molten metal drops can stick to an ordinary PC visor, scorching pits that harm vision and protection; where molten metal splash is a risk, choose a model expressly rated for it, and wear it with flame-retardant workwear, protective gloves and other full-body protection.
Acceptance and Use
- Check the test report and marking. The model, manufacturer and standard number on the report must match the delivered product, and the product should carry a permanent marking.
- Inspect the visor. Its surface should be smooth, with no scratches or ripples; a scratched, deformed or fogged visor harms vision and should be replaced.
- Check the headband and adjustment. The headband should adjust for tightness, and the visor should flip up and down smoothly and lock reliably; it should not press on the head or slip off.
- Clean only with diluted detergent and water. Do not wipe with ethanol, acetone or other organic solvents — they damage the visor.
- Store away from pressure and direct sunlight. A visor deformed by pressure or aged by sun loses impact resistance.
Frequently Asked Questions
Must a face shield and safety glasses always be worn together?
For heavy-splash work, yes. A shield protects the whole face, but splash can still reach the eyes from below or the sides, while glasses protect the eyes but not the cheeks and forehead. Worn together, the protection is complete.
Can a general impact shield be used for welding?
No. Welding arc light needs a dedicated welding filter with a shade number, which a general shield does not have. For welding, choose a welding helmet or welding shield under GB/T 3609.1-2008.
How much heat can a heat-resistant shield take?
It varies by model — there is no single number. Check the heat resistance and temperature range marked on the product, judge against the actual site temperature, and ask the supplier for a test report where needed.
Can a scratched visor still be used?
Light scratches that do not affect vision can stay in use, but a visor with many scratches and blurred vision should have its visor replaced. The visor is a consumable — many models allow the visor alone to be replaced without scrapping the whole shield.